The Challenges

Technical Specifications

PRIME MOVER: with Needle Vibrator :

  • 10HP 1440-RPM for fix Console.
  • 20HP 1440-RPM for under carriage.

PRIME MOVER: without Needle Vibrator :

  • 10HP 1440-RPM for fix Console.
  • 10HP 1440-RPM for under carriage.


Fix Console :

  • This Hydraulic console controls the forward and reverse movement of the under carriage and the travel bogie by means of hydraulic motors.
  • Under Carriage/Finisher Assembly :
  • Under Carriage accommodates the most critical components of the machine. It encompasses the vibratory finishing drum, Needle vibrators, Spreader Auger, Drag pan and Texturing Mat.
  • The Under Carriage travels with a speed 30 mtrs/min.

Vibratory Finishing Drum :

  • The finishing drum is 4 feet in length and 10.7 inches (272 mm) in diameter. It rotates at a speed of 195 rpm. The finishing drum vibrates at 1500vpm.This Drum is precisely balance with the help of computerized balancing system to obtain quality finish.

Spreader Auger :

  • The Auger is welded with hard faced welding to obtain maximum life. The auger is designed to work in the direction of travel movement of the machine.

Angular Needle Vibrators (Optional) :

  • Minnch-USA makes angular needle vibrators with 10,500 vpm. These dual vibrators are designed with an angular twist in the opposite directions. These vibrators operate alternately by penetrating in to the concrete depth with the direction of twist along the motion of the under carriage.

Hydraulic Oil Capacities :

  • Fix console: 110 liters
  • Under carriage: 140 liters.

Traction System :

  • Traction Drive: Two hydraulically driven flanged wheels bogie.
  • Traction Speed: Up to 52 feet/min (15.86 mtrs/min).

Project Description

Value:6

Cylinder Finishers

Cylinder Finishers For Road & Airport

Project Description

Client:Cylinder Finishers For Road & Airport
Value:7
Salient Features
  • Very low power consumption with higher output, hence faster payback
  • Remote operator controls for better monitoring while paving
  • Advanced energy efficient electric Drive System with step less speed control
  • User-friendly, fast & accurate controls

6Optional

1 Prime Mover
a Driver End Panel 5 HP Geared Motor
b Vibratory Cylinder 5 HP Geared Motor
c Bogie RH & LH 1 HP + 1 HP Geared Motor
d Vibratory Cylinder 1 HP Electric Motor
2 Traction System
a Traction Drive Two Electrically driven double flanged bogie wheels
b Traction Speed 0-22 mpm
3 Vibratory Cylinder Under Carriage
a Finished Cylinder 270 mm dia., 1.2 mtr. long precisely balanced
b Extra Long Screw Auguer (RH & LH) with hardened flights
c Finishing Tolerance: + 3 mm in 12 ft.
4 Machine Controls
a Adjustable Carriage Movement with Variable Speed Drive
b Shock Protection
c Overload Protection
5 Construction
a Frame: All welded, pin connected main frame. Available in length of 2.40 mtr., 1.2 mtr., 0.6 mtr., which are infinitelyadjustable up to 62 ft. (CE 200) and 110 ft. (CE 400)
b Finishing Width: Finishing width normally 3ft. (0.9 mtr.) less than frame width and adjustable from 1mtr. to 32 mtr.
a Longitudinal & Transverse Groove Marker
b Longitudinal & Transverse PVC Water Stop Inserter Attachment
c Trimmer Attachment
d Transport Assembly
e Slope Wedges

Cylinder Finishers For Canals

Salient Features
  • Very low power consumption with higher output, hence faster payback
  • Remote operator controls for better monitoring while paving
  • Advanced energy efficient electric Drive System with step less speed control
  • User-friendly, fast & accurate controls

6Optional

1 Prime Mover
a Driver End Panel 5 HP Geared Motor
b Vibratory Cylinder 5 HP Geared Motor
c Bogie RH & LH 1 HP + 1 HP Geared Motor
d Vibratory Cylinder 1 HP Electric Motor
2 Traction System
a Traction Drive Two Electrically driven double flanged bogie wheels
b Traction Speed 0-22 mpm
3 Vibratory Cylinder Under Carriage
a Finished Cylinder 270 mm dia., 1.2 mtr. long precisely balanced
b Extra Long Screw Auguer (RH & LH) with hardened flights
c Finishing Tolerance: + 3 mm in 12 ft.
4 Machine Controls
a Adjustable Carriage Movement with Variable Speed Drive
b Shock Protection
c Overload Protection
5 Construction
a Frame: All welded, pin connected main frame. Available in length of 2.40 mtr., 1.2 mtr., 0.6 mtr., which are infinitelyadjustable up to 62 ft. (CE 200) and 110 ft. (CE 400)
b Finishing Width: Finishing width normally 3ft. (0.9 mtr.) less than frame width and adjustable from 1mtr. to 32 mtr.
a Longitudinal & Transverse Groove Marker
b Longitudinal & Transverse PVC Water Stop Inserter Attachment
c Trimmer Attachment
d Transport Assembly
e Slope Wedges