Unisteel Concreate Pavers Model:RCP 750

General Specifications

  • The frame structure is light in weight and therefore very easy for transport and erection.
  • The frames are available in the lengths of 4feet; 8feet and 12feet.These is pin bolted together according to the size of the slab width.
  • RCP-750 can be incorporated in use for a working width between 3mtr to 20 mtrs.
  • Hydraulically operated needle vibrators are provided on the mobile assembly to stir the concrete to remove any air bubbles if present in the mix and thus reduce the porosity. Due to Needle Vibrator may struck side partition you have to do 400mm manually on both side.
  • Hydraulic Needle vibrators vibrate with a frequency 10,500 vpm.
  • The paving is carried out with a Vibrating-finishing drum of 4 feet in length and 10.7 inches (272 mm) in diameter.
  • The finishing drum is equipped with vibrator to achieve better finishing.
  • Crowning arrangement is provided for cambering the surface of the road.
  • 4 no’s of mechanically adjustable jacks are provided for maintaining the machine level.
  • The forward and reverse motion of the machine is controlled by hydraulically operated bogie.
  • The finishing drum bracket has an ability to swivel at an angle of 20 and deg; in either direction to accommodate harsh mix for a quality finish.
  • Leveling screws are used to level the rails on which the machine moves to maintain the smoothness of surface and to avoid irregular paving.

Technical Specifications

  • PRIME MOVER with Needle Vibrator: 10HP 1440-RPM for fix Console. 20HP 1440-RPM for under carriage.
  • PRIME MOVER without Needle Vibrator: 10HP 1440-RPM for fix Console. 10HP 1440-RPM for under carriage.
  • Fix Console: This Hydraulic console controls the forward and reverse movement of the under carriage & the travel bogie by means of hydraulic motors.
  • Under Carriage/Finisher Assembly: Under Carriage accommodates the most critical components of the machine. It encompasses the vibratory finishing drum, Needle vibrators, Spreader Auger, Drag pan and Texturing Mat. The Under Carriage travels with a speed 30 mtrs/min.
  • Vibratory Finishing Drum: The finishing drum is 4 feet in length & 10.7 inches (272 mm) in diameter. It rotates at a speed of 195 rpm. The finishing drum vibrates at 1500vpm.This Drum is precisely balance with the help of computerized balancing system to obtain quality finish.
  • Spreader Auger: The Auger is welded with hard faced welding to obtain maximum life. The auger is designed to work in the direction of travel movement of the machine.
  • Angular Needle Vibrators (Optional): Minnch-USA makes angular needle vibrators with 10,500 vpm. These dual vibrators are designed with an angular twist in the opposite directions. These vibrators operate alternately by penetrating in to the concrete depth with the direction of twist along the motion of the under carriage.
  • Hydraulic Oil Capacities: Fix console: 110 liters. Under carriage: 140 ltrs.
  • Traction System: Traction Drive: Two hydraulically driven flanged wheels bogie. Traction Speed: Up to 52 feet/min (15.86 mtrs/min).